Shanxian Chemical
SUPPLEMENTS
BakingSodaHydrogenPeroxideDishSoapCleanGrout
Clean the tile gap with baking soda, hydrogen peroxide and detergent
Material preparation
Prepare baking soda, hydrogen peroxide and detergent. These three are common cleaning products and are easy to find in ordinary grocery stores or supermarkets.
Operation steps
1. ** Preparation of cleaning solution **: Slowly pour an appropriate amount of baking soda into the container, and then add an appropriate amount of hydrogen peroxide. When the two meet, they may cause a little chemical reaction and produce bubbles, which is normal. Then, add a little detergent. The ratio of the three is roughly maintained at two spoonfuls of baking soda, one cup of hydrogen peroxide, and a few drops of detergent. After that, stir well until a uniform paste is formed.
2. ** Apply cleaning solution **: Using a brush, carefully apply the prepared cleaning solution evenly over the tile gaps. During the application process, make sure that the solution can fully cover the gaps, so that the dirt in it can be fully contacted with the cleaning ingredients.
3. ** Let stand and wait **: Let the tile gaps with the applied solution stand for a period of time, about 15 to 20 minutes. During this period, baking soda, hydrogen peroxide and detergent work together to decompose and loosen the dirt in the gaps.
4. ** Brush the gaps **: After the waiting time is over, use a brush to brush the tile gaps vigorously. During this process, it can be seen that the dirt gradually breaks away from the gaps and is brushed out along with the solution.
5. ** Rinse clean **: Rinse the gap of the tiles thoroughly with water, and rinse off the dirt and residual cleaning solution. Make sure that no cleaning ingredients remain in the gap to avoid damage to the tiles.
After this method, the gap of the tiles will look brand new and return to a clean state. This cleaning method is not only efficient and convenient, but also green and environmentally friendly. You may wish to give it a try.
Material preparation
Prepare baking soda, hydrogen peroxide and detergent. These three are common cleaning products and are easy to find in ordinary grocery stores or supermarkets.
Operation steps
1. ** Preparation of cleaning solution **: Slowly pour an appropriate amount of baking soda into the container, and then add an appropriate amount of hydrogen peroxide. When the two meet, they may cause a little chemical reaction and produce bubbles, which is normal. Then, add a little detergent. The ratio of the three is roughly maintained at two spoonfuls of baking soda, one cup of hydrogen peroxide, and a few drops of detergent. After that, stir well until a uniform paste is formed.
2. ** Apply cleaning solution **: Using a brush, carefully apply the prepared cleaning solution evenly over the tile gaps. During the application process, make sure that the solution can fully cover the gaps, so that the dirt in it can be fully contacted with the cleaning ingredients.
3. ** Let stand and wait **: Let the tile gaps with the applied solution stand for a period of time, about 15 to 20 minutes. During this period, baking soda, hydrogen peroxide and detergent work together to decompose and loosen the dirt in the gaps.
4. ** Brush the gaps **: After the waiting time is over, use a brush to brush the tile gaps vigorously. During this process, it can be seen that the dirt gradually breaks away from the gaps and is brushed out along with the solution.
5. ** Rinse clean **: Rinse the gap of the tiles thoroughly with water, and rinse off the dirt and residual cleaning solution. Make sure that no cleaning ingredients remain in the gap to avoid damage to the tiles.
After this method, the gap of the tiles will look brand new and return to a clean state. This cleaning method is not only efficient and convenient, but also green and environmentally friendly. You may wish to give it a try.
Scan to WhatsApp
