Shanxian Chemical
SUPPLEMENTS
Clean Grout Hydrogen Peroxide
The Method of Cleaning Tile Joining Agent with Hydrogen Peroxide
Now there is a need to clean tile jointing agent, so you can use hydrogen peroxide for it.
Prepare an appropriate amount of hydrogen peroxide first, and quantify it according to the degree of dirt on the jointing. If the stain is heavy, you can prepare a little more; if the stain is light, reduce the amount.
Take a clean container and pour hydrogen peroxide in it. You can also use a watering can to hold hydrogen peroxide for even spraying.
Gently apply hydrogen peroxide to the tile jointing. If spraying with a watering can, make sure that the jointing is covered so that the hydrogen peroxide is in full contact with the dirt.
Wait for the hydrogen peroxide to act for a while, about a few minutes. During this time, the hydrogen peroxide reacts chemically with the dirt and decomposes the stain.
Then, take a soft brush and gently brush the hook seam. Appropriate force should not damage the hook seam and the tile surface.
After brushing, rinse the hook seam with water to rinse off the residual hydrogen peroxide and the dirt under the brush.
If one cleaning is not ideal, you can follow the above steps to clean again until the hook is as clean as ever. In this way, the method of cleaning the tile hook with hydrogen peroxide is over.
Now there is a need to clean tile jointing agent, so you can use hydrogen peroxide for it.
Prepare an appropriate amount of hydrogen peroxide first, and quantify it according to the degree of dirt on the jointing. If the stain is heavy, you can prepare a little more; if the stain is light, reduce the amount.
Take a clean container and pour hydrogen peroxide in it. You can also use a watering can to hold hydrogen peroxide for even spraying.
Gently apply hydrogen peroxide to the tile jointing. If spraying with a watering can, make sure that the jointing is covered so that the hydrogen peroxide is in full contact with the dirt.
Wait for the hydrogen peroxide to act for a while, about a few minutes. During this time, the hydrogen peroxide reacts chemically with the dirt and decomposes the stain.
Then, take a soft brush and gently brush the hook seam. Appropriate force should not damage the hook seam and the tile surface.
After brushing, rinse the hook seam with water to rinse off the residual hydrogen peroxide and the dirt under the brush.
If one cleaning is not ideal, you can follow the above steps to clean again until the hook is as clean as ever. In this way, the method of cleaning the tile hook with hydrogen peroxide is over.
Scan to WhatsApp
