Shanxian Chemical
SUPPLEMENTS
How To Use Hydrogen Peroxide Contact Solution
Guide to the use of hydrogen peroxide contact lens care solution
Those who want to make good use of hydrogen peroxide contact lens care solution must understand the method and pay attention to the order in order to obtain its effect and eye protection. The following details its use.
Preparation
First clean your hands and wipe dry with a clean towel. Take a lens case, it also needs to be clean and scale-free. If there are persistent stains, it must be washed and then used.
Care steps
1. ** Inject care solution **: Pour an appropriate amount of hydrogen peroxide contact lens care solution into the lens groove of the lens case. The dosage should be appropriate to completely immerse the lens. It should not be too little to cause the lens to not be fully immersed, nor too much to overflow.
2. ** Put in the lens **: Gently take the contact lens and place it in the groove containing the treatment solution with a gentle hand. Pay attention to the front and back sides of the lens when placing, do not invert, otherwise it will affect the care effect.
3. ** Wait for the reaction **: Cover the lid of the lens case and let it stand in a safe place. The chemical reaction between the treatment solution and the lens takes time, ranging from a few hours, depending on the instructions of the treatment solution. During this process, do not open the lens case at will, so as not to interfere with the reaction process.
4. ** Neutralization treatment **: Some hydrogen peroxide treatment solutions need to be neutralized. After the reaction is completed, you can add a neutralizing sheet or perform other neutralizing operations according to the product instructions to ensure that the pH of the treatment solution is appropriate and does not hurt the eyes.
Take out the lens and use
1. ** Take out the lens **: After the neutralization is completed, gently clip the edge of the lens with forceps and take it out of the lens case. The method of taking should be light, so as not to damage the lens.
2. ** Rinse the lens **: Gently rinse both sides of the lens with normal saline or a special contact lens rinse solution to remove the residue of the treatment solution. When rinsing, the water flow should be slow and evenly flushed all over the lens.
3. ** Wear lenses **: Wash your hands, place the rinsed lenses at your fingertips, lift your eyelids gently, and put the lenses into your eyes smoothly. After wearing the glasses, close your eyes slightly and rotate your eyes to make the lenses fit comfortably.
Use hydrogen peroxide contact lens treatment solution. Every step is related to eye health. Be sure to follow the instructions and be careful, so that you can protect your eyes and see clearly.
Those who want to make good use of hydrogen peroxide contact lens care solution must understand the method and pay attention to the order in order to obtain its effect and eye protection. The following details its use.
Preparation
First clean your hands and wipe dry with a clean towel. Take a lens case, it also needs to be clean and scale-free. If there are persistent stains, it must be washed and then used.
Care steps
1. ** Inject care solution **: Pour an appropriate amount of hydrogen peroxide contact lens care solution into the lens groove of the lens case. The dosage should be appropriate to completely immerse the lens. It should not be too little to cause the lens to not be fully immersed, nor too much to overflow.
2. ** Put in the lens **: Gently take the contact lens and place it in the groove containing the treatment solution with a gentle hand. Pay attention to the front and back sides of the lens when placing, do not invert, otherwise it will affect the care effect.
3. ** Wait for the reaction **: Cover the lid of the lens case and let it stand in a safe place. The chemical reaction between the treatment solution and the lens takes time, ranging from a few hours, depending on the instructions of the treatment solution. During this process, do not open the lens case at will, so as not to interfere with the reaction process.
4. ** Neutralization treatment **: Some hydrogen peroxide treatment solutions need to be neutralized. After the reaction is completed, you can add a neutralizing sheet or perform other neutralizing operations according to the product instructions to ensure that the pH of the treatment solution is appropriate and does not hurt the eyes.
Take out the lens and use
1. ** Take out the lens **: After the neutralization is completed, gently clip the edge of the lens with forceps and take it out of the lens case. The method of taking should be light, so as not to damage the lens.
2. ** Rinse the lens **: Gently rinse both sides of the lens with normal saline or a special contact lens rinse solution to remove the residue of the treatment solution. When rinsing, the water flow should be slow and evenly flushed all over the lens.
3. ** Wear lenses **: Wash your hands, place the rinsed lenses at your fingertips, lift your eyelids gently, and put the lenses into your eyes smoothly. After wearing the glasses, close your eyes slightly and rotate your eyes to make the lenses fit comfortably.
Use hydrogen peroxide contact lens treatment solution. Every step is related to eye health. Be sure to follow the instructions and be careful, so that you can protect your eyes and see clearly.
Scan to WhatsApp
