Shanxian Chemical
SUPPLEMENTS
Hydrogen Generator DIY
The method of making a hydrogen generator
If you want to make a hydrogen generator today, you should follow the following method. Prepare all kinds of materials first, and the required materials, such as utensils, metals, wires, etc., must be well combined.
Choose utensils, preferably with corrosion-resistant quality, because of the process of hydrogen production, or there may be chemical reactions, which may damage the utensils. For metals, when taking active ones, such as zinc, etc., which meet with acid, hydrogen can be generated.
The choice of acid is also exquisite. Sulfuric acid and hydrochloric acid can be used, but the concentration must be moderate. If it is too concentrated, it will be dangerous, and if it is too dilute, the reaction will be slow. The metal is placed in the vessel, and the acid is slowly injected. At this time, the chemical reaction starts, and the hydrogen is gradually generated.
The wire is used as a guide gas. It must be connected to a suitable place so that the hydrogen can flow out and be introduced into the desired place.
The whole process must be cautious. The acid is corrosive, and it should not be stained on the skin during operation. Hydrogen is flammable and should be kept away from open flames to prevent accidents. In this way, a homemade hydrogen generator can be obtained to provide hydrogen for all needs.
If you want to make a hydrogen generator today, you should follow the following method. Prepare all kinds of materials first, and the required materials, such as utensils, metals, wires, etc., must be well combined.
Choose utensils, preferably with corrosion-resistant quality, because of the process of hydrogen production, or there may be chemical reactions, which may damage the utensils. For metals, when taking active ones, such as zinc, etc., which meet with acid, hydrogen can be generated.
The choice of acid is also exquisite. Sulfuric acid and hydrochloric acid can be used, but the concentration must be moderate. If it is too concentrated, it will be dangerous, and if it is too dilute, the reaction will be slow. The metal is placed in the vessel, and the acid is slowly injected. At this time, the chemical reaction starts, and the hydrogen is gradually generated.
The wire is used as a guide gas. It must be connected to a suitable place so that the hydrogen can flow out and be introduced into the desired place.
The whole process must be cautious. The acid is corrosive, and it should not be stained on the skin during operation. Hydrogen is flammable and should be kept away from open flames to prevent accidents. In this way, a homemade hydrogen generator can be obtained to provide hydrogen for all needs.
Scan to WhatsApp
