Shanxian Chemical
SUPPLEMENTS
Hydrogen Peroxide Bleach Mix
On the Method of Mixing Hydrogen Peroxide Bleach
If you want to make good use of the method of mixing oxyhydrogen water and bleach, you must first know its properties and be careful about its degree in order to avoid its effects.
Hydrogen water has the ability to oxidize, can clean stains and remove stains, and is milder. However, it is easy to decompose in case of heat, light or certain impurities. Bleach also works by the power of oxidation, which can make the color fade and clean.
When mixing the two, you must pay attention to the order in sequence. It is advisable to slowly pour the oxyhydrogen water into the vessel containing bleach first, and stir it while pouring to make the two uniform. If the order is reversed, or the pouring is too hasty, it may cause a violent reaction, which is harmful and not beneficial.
As for the ratio of the two, it should be determined according to the weight of the thing to be cleaned and the weight of the stain. If the stain is deep, the ratio is slightly higher; if the stain is light, the ratio is slightly lower. However, do not overdo it to prevent damage to the thing to be cleaned or the release of harmful gases.
When operating again, it must be in a well-ventilated place and equipped with protective equipment, such as gloves and masks, to avoid hurting the skin and breathing.
After use, the residual liquid should be properly disposed of and should not be dumped at will to avoid staining the environment.
The method of mixing hydrogen and oxygen water with bleach can increase the effect of cleaning, but if it is used carelessly, it will not be a disaster. Therefore, it is necessary to investigate and distinguish carefully, and be cautious in order to find the best.
If you want to make good use of the method of mixing oxyhydrogen water and bleach, you must first know its properties and be careful about its degree in order to avoid its effects.
Hydrogen water has the ability to oxidize, can clean stains and remove stains, and is milder. However, it is easy to decompose in case of heat, light or certain impurities. Bleach also works by the power of oxidation, which can make the color fade and clean.
When mixing the two, you must pay attention to the order in sequence. It is advisable to slowly pour the oxyhydrogen water into the vessel containing bleach first, and stir it while pouring to make the two uniform. If the order is reversed, or the pouring is too hasty, it may cause a violent reaction, which is harmful and not beneficial.
As for the ratio of the two, it should be determined according to the weight of the thing to be cleaned and the weight of the stain. If the stain is deep, the ratio is slightly higher; if the stain is light, the ratio is slightly lower. However, do not overdo it to prevent damage to the thing to be cleaned or the release of harmful gases.
When operating again, it must be in a well-ventilated place and equipped with protective equipment, such as gloves and masks, to avoid hurting the skin and breathing.
After use, the residual liquid should be properly disposed of and should not be dumped at will to avoid staining the environment.
The method of mixing hydrogen and oxygen water with bleach can increase the effect of cleaning, but if it is used carelessly, it will not be a disaster. Therefore, it is necessary to investigate and distinguish carefully, and be cautious in order to find the best.
Scan to WhatsApp
