Shanxian Chemical
SUPPLEMENTS
Hydrogen Peroxide in Cut
On the application of oxyhydrogen water to cutting things
The art of cutting things, if you want it to be fine and good, there must be things to help it. Hydrogen water, named "Hydrogen Peroxide In Cut", is especially useful in cutting things.
In the past, the method of cutting things relied on force and tools, but its effect was not good, or the cutting was not straight, or the material was damaged. Since oxyhydrogen water was used to cut things, it has changed. Hydrogen water has characteristics, which can help the cutter to sharpen its edge and speed its work. When cutting, add an appropriate amount of oxyhydrogen water, and the cutter will travel on the material. If the light boat is in the wave, it will be smooth and unimpeded.
Looking at the theory, hydrogen and oxygen water can slightly change when it is exposed to objects, making the structure of the material easier to break during cutting, and it can protect the cutter and slow its wear. Taking metal cutting as an example, without using hydrogen and oxygen water, the cutter is often heated and blunt, and the cutting is difficult and slow; if used, the cutter will be sharp for a long time, and the cutting lines will be even and straight, and the material will not be damaged.
And hydrogen and oxygen water are used in cutting objects, which is not only beneficial to the knife, but also beneficial to the environment. Its nature is relatively pure, no foul gas, and does not stain materials and land. It is also a good way to cut objects. Therefore, those who cut objects should know the wonders of hydrogen and oxygen water and make good use of it, and the results will be multiplied, and everything will be cut well.
The art of cutting things, if you want it to be fine and good, there must be things to help it. Hydrogen water, named "Hydrogen Peroxide In Cut", is especially useful in cutting things.
In the past, the method of cutting things relied on force and tools, but its effect was not good, or the cutting was not straight, or the material was damaged. Since oxyhydrogen water was used to cut things, it has changed. Hydrogen water has characteristics, which can help the cutter to sharpen its edge and speed its work. When cutting, add an appropriate amount of oxyhydrogen water, and the cutter will travel on the material. If the light boat is in the wave, it will be smooth and unimpeded.
Looking at the theory, hydrogen and oxygen water can slightly change when it is exposed to objects, making the structure of the material easier to break during cutting, and it can protect the cutter and slow its wear. Taking metal cutting as an example, without using hydrogen and oxygen water, the cutter is often heated and blunt, and the cutting is difficult and slow; if used, the cutter will be sharp for a long time, and the cutting lines will be even and straight, and the material will not be damaged.
And hydrogen and oxygen water are used in cutting objects, which is not only beneficial to the knife, but also beneficial to the environment. Its nature is relatively pure, no foul gas, and does not stain materials and land. It is also a good way to cut objects. Therefore, those who cut objects should know the wonders of hydrogen and oxygen water and make good use of it, and the results will be multiplied, and everything will be cut well.
Scan to WhatsApp
