Shanxian Chemical
SUPPLEMENTS
Hydrogen Peroxide Solution Mold
On Dioxygen Mold Making
If you want to make a mold, the liquid of hydrogen and oxygen is of great use. The liquid of hydrogen and oxygen is active and can be transformed, and it is beneficial to the way of mold making.
At the beginning, the equipment and materials are prepared. The equipment must be clean and suitable, and the liquid of hydrogen and oxygen of the material must be pure. Observe its degree, and it can only be used if it is appropriately thick. If it is too thick, it is easy to change; if it is too thin, it is weak, and it is difficult to achieve its effect.
When making a mold, slowly inject the liquid of hydrogen and oxygen into the base of the mold embryo. Its liquid flow is also like a small spring flowing, uniform and orderly. With the injection of the liquid, observe its change. The contact between the hydrogen-oxygen liquid and the embryo base, either slightly foaming or making a light noise, is a sign of transformation. When the liquid is full of embryo mold, let it sit in a cool place, do not disturb it.
After a while, the hydrogen-oxygen liquid gradually coagulates. When coagulating, its quality gradually changes, from clear to thick, from soft to firm. This process is also like the chemical breeding of things, and gradually takes on the shape of the mold.
And its formation, the mold quality is firm and moist, and the texture is clear. With the creation of things, you can get exquisite tools. The system of covering the hydrogen-oxygen liquid in the mold can transform the quality of the embryo base, making it condensed and formed, beautiful and durable.
When using hydrogen and oxygen liquid to make molds, one must also be cautious. Its liveliness, avoid near fireworks, and prevent its deflagration. When handling, abide by its rules and protect yourself and what you have. Only in this way can the hydrogen and oxygen liquid be used to form a delicate mold and be used by various industries.
If you want to make a mold, the liquid of hydrogen and oxygen is of great use. The liquid of hydrogen and oxygen is active and can be transformed, and it is beneficial to the way of mold making.
At the beginning, the equipment and materials are prepared. The equipment must be clean and suitable, and the liquid of hydrogen and oxygen of the material must be pure. Observe its degree, and it can only be used if it is appropriately thick. If it is too thick, it is easy to change; if it is too thin, it is weak, and it is difficult to achieve its effect.
When making a mold, slowly inject the liquid of hydrogen and oxygen into the base of the mold embryo. Its liquid flow is also like a small spring flowing, uniform and orderly. With the injection of the liquid, observe its change. The contact between the hydrogen-oxygen liquid and the embryo base, either slightly foaming or making a light noise, is a sign of transformation. When the liquid is full of embryo mold, let it sit in a cool place, do not disturb it.
After a while, the hydrogen-oxygen liquid gradually coagulates. When coagulating, its quality gradually changes, from clear to thick, from soft to firm. This process is also like the chemical breeding of things, and gradually takes on the shape of the mold.
And its formation, the mold quality is firm and moist, and the texture is clear. With the creation of things, you can get exquisite tools. The system of covering the hydrogen-oxygen liquid in the mold can transform the quality of the embryo base, making it condensed and formed, beautiful and durable.
When using hydrogen and oxygen liquid to make molds, one must also be cautious. Its liveliness, avoid near fireworks, and prevent its deflagration. When handling, abide by its rules and protect yourself and what you have. Only in this way can the hydrogen and oxygen liquid be used to form a delicate mold and be used by various industries.
Scan to WhatsApp
