Shanxian Chemical
SUPPLEMENTS
Hydrogen Tank for Balloons
The device for making hydrogen balloons
If you want to be a container for hydrogen balloons, there is a need for it. The quality of the device must be tough, so as to withstand the filling of hydrogen and prevent leakage. Its material or metal is strong and dense, and can withstand internal pressure without losing its solids.
The method of making, first determine its shape. It is usually cylindrical in shape, with the upper and lower circles and planes. This shape is easy to make, and the force is uniform. Its diameter and length, depending on the use. If it is small, the diameter is about two or three feet long; if it is used in a wide range, the diameter is several feet, and the length is more than three feet.
At the beginning of the device, the metallurgical material is a plate, so that it is even and thin. The upper and lower ends are cast as a round cover, which is closed to the cylinder, and it is also seamless. The cover has holes, which are for nanohydrogen and closed mouths, and the mouth is equipped with mechanisms, which can be opened and closed freely to control the entry and exit of gas.
After the device is completed, try its airtightness. Place the device in water and inflate it, depending on whether there are bubbles coming out. If so, make up for the leakage until there are no bubbles before it can be used.
This device is completed, and it contains hydrogen in it to tie the balloon, so that it can rise in the air and let it parade for various purposes.
If you want to be a container for hydrogen balloons, there is a need for it. The quality of the device must be tough, so as to withstand the filling of hydrogen and prevent leakage. Its material or metal is strong and dense, and can withstand internal pressure without losing its solids.
The method of making, first determine its shape. It is usually cylindrical in shape, with the upper and lower circles and planes. This shape is easy to make, and the force is uniform. Its diameter and length, depending on the use. If it is small, the diameter is about two or three feet long; if it is used in a wide range, the diameter is several feet, and the length is more than three feet.
At the beginning of the device, the metallurgical material is a plate, so that it is even and thin. The upper and lower ends are cast as a round cover, which is closed to the cylinder, and it is also seamless. The cover has holes, which are for nanohydrogen and closed mouths, and the mouth is equipped with mechanisms, which can be opened and closed freely to control the entry and exit of gas.
After the device is completed, try its airtightness. Place the device in water and inflate it, depending on whether there are bubbles coming out. If so, make up for the leakage until there are no bubbles before it can be used.
This device is completed, and it contains hydrogen in it to tie the balloon, so that it can rise in the air and let it parade for various purposes.
Scan to WhatsApp
