Shanxian Chemical
SUPPLEMENTS
Make Disinfectant Spray Hydrogen Peroxide
On the method of making disinfectant spray with hydrogen peroxide
If you want to make a disinfectant spray now, you can use hydrogen peroxide. Hydrogen peroxide has strong oxidizing properties and can break the structure of bacteria to achieve disinfection effect.
The method of making, the first thing to do is to prepare. Hydrogen peroxide solution, appropriate amount of water, and clean spray bottle are required. Select hydrogen peroxide solution, and its concentration is appropriate. The common medical hydrogen peroxide concentration is mostly 3%. If this is used, it can be mixed with water in an appropriate proportion. If it is a high concentration, it must be diluted to prevent excessive oxidative damage or injury.
Next, measure. According to the degree of disinfection required and the use, determine the ratio of hydrogen peroxide to water. For general environmental surface disinfection, hydrogen peroxide can be mixed with water in a ratio of one to ten or one to twenty. If you take ten milliliters of hydrogen peroxide, add 100 to 200 milliliters of water. The measuring device should be clean and precise, such as a measuring cylinder or syringe.
Then, mix. Slowly inject the measured hydrogen peroxide into the water and stir it lightly at the same time to ensure that the two are evenly mixed. When stirring, the action should be slow to avoid excessive bubbles.
Finally, fill. Pour the mixed liquid carefully into the spray bottle and tighten the cap to get the disinfectant spray. When
is used, it can be sprayed on the place to be disinfected, such as the desktop, door handle, etc., for a while, so that the hydrogen peroxide can fully interact with the bacteria to achieve the purpose of disinfection. However, it should be noted that hydrogen peroxide is corrosive and should be avoided from contact with the skin, eyes, etc. If it is accidentally touched, rinse it with a lot of water quickly, and seek medical attention in severe cases. And it is easy to decompose. The prepared spray should be stored in a cool place and used as soon as possible.
If you want to make a disinfectant spray now, you can use hydrogen peroxide. Hydrogen peroxide has strong oxidizing properties and can break the structure of bacteria to achieve disinfection effect.
The method of making, the first thing to do is to prepare. Hydrogen peroxide solution, appropriate amount of water, and clean spray bottle are required. Select hydrogen peroxide solution, and its concentration is appropriate. The common medical hydrogen peroxide concentration is mostly 3%. If this is used, it can be mixed with water in an appropriate proportion. If it is a high concentration, it must be diluted to prevent excessive oxidative damage or injury.
Next, measure. According to the degree of disinfection required and the use, determine the ratio of hydrogen peroxide to water. For general environmental surface disinfection, hydrogen peroxide can be mixed with water in a ratio of one to ten or one to twenty. If you take ten milliliters of hydrogen peroxide, add 100 to 200 milliliters of water. The measuring device should be clean and precise, such as a measuring cylinder or syringe.
Then, mix. Slowly inject the measured hydrogen peroxide into the water and stir it lightly at the same time to ensure that the two are evenly mixed. When stirring, the action should be slow to avoid excessive bubbles.
Finally, fill. Pour the mixed liquid carefully into the spray bottle and tighten the cap to get the disinfectant spray. When
is used, it can be sprayed on the place to be disinfected, such as the desktop, door handle, etc., for a while, so that the hydrogen peroxide can fully interact with the bacteria to achieve the purpose of disinfection. However, it should be noted that hydrogen peroxide is corrosive and should be avoided from contact with the skin, eyes, etc. If it is accidentally touched, rinse it with a lot of water quickly, and seek medical attention in severe cases. And it is easy to decompose. The prepared spray should be stored in a cool place and used as soon as possible.
Scan to WhatsApp
