Shanxian Chemical
SUPPLEMENTS
Make Oxygen from Hydrogen Peroxide
On the Method of Using Hydrogen Peroxide to Make Oxygen
There is a method of seeking oxygen in the world. Hydrogen peroxide is used for it, and its method is simple and effective.
Hydrogen peroxide is also a chemical substance. If you want to use it to make oxygen, you need to be clear. Hydrogen peroxide decomposes gradually under normal conditions, but the rate is slow. If you add a catalyst, its variable speed will be dramatic, and the oxygen escape speed will be too high.
The commonly used catalyst, manganese dioxide is the top choice. Take an appropriate amount of hydrogen peroxide, put it in a clean vessel, and put a little manganese dioxide in it. In a moment, you can see the effervescence in the device, which is the appearance of oxygen escaping.
When making oxygen, pay attention to all the details. The device must be purified to prevent impurities from disturbing it. And the amount of hydrogen peroxide and the amount of catalyst are all related to the effect of oxygen production. If the amount is appropriate, the gas will be sufficient, and if the amount is too large, it will be the opposite.
To collect oxygen, you can use the method of drainage. Fill the gas bottle with water, turn it upside down in the sink, and enter the airway into the mouth of the bottle. When the bubbles come out continuously and evenly, this is pure oxygen, which can be collected. After closing, first remove the airway, and then turn off the heat source to prevent the trouble of backsucking.
Using hydrogen peroxide to produce oxygen is a convenient way, and it is useful in all things experimental. If you understand the method and make good use of it, you will benefit a lot.
There is a method of seeking oxygen in the world. Hydrogen peroxide is used for it, and its method is simple and effective.
Hydrogen peroxide is also a chemical substance. If you want to use it to make oxygen, you need to be clear. Hydrogen peroxide decomposes gradually under normal conditions, but the rate is slow. If you add a catalyst, its variable speed will be dramatic, and the oxygen escape speed will be too high.
The commonly used catalyst, manganese dioxide is the top choice. Take an appropriate amount of hydrogen peroxide, put it in a clean vessel, and put a little manganese dioxide in it. In a moment, you can see the effervescence in the device, which is the appearance of oxygen escaping.
When making oxygen, pay attention to all the details. The device must be purified to prevent impurities from disturbing it. And the amount of hydrogen peroxide and the amount of catalyst are all related to the effect of oxygen production. If the amount is appropriate, the gas will be sufficient, and if the amount is too large, it will be the opposite.
To collect oxygen, you can use the method of drainage. Fill the gas bottle with water, turn it upside down in the sink, and enter the airway into the mouth of the bottle. When the bubbles come out continuously and evenly, this is pure oxygen, which can be collected. After closing, first remove the airway, and then turn off the heat source to prevent the trouble of backsucking.
Using hydrogen peroxide to produce oxygen is a convenient way, and it is useful in all things experimental. If you understand the method and make good use of it, you will benefit a lot.
Scan to WhatsApp
