Shanxian Chemical

SUPPLEMENTS
  • Home
  • Making Hydrogen Peroxide Vapor
  • Making Hydrogen Peroxide Vapor

Making Hydrogen Peroxide Vapor

The method of making hydrogen peroxide steam
If you want to make hydrogen peroxide steam, there are important methods. The first thing is to clarify the utensils and materials used. A clean container is necessary for the reaction; and a pure liquid of hydrogen peroxide is required, which is the source of gas production.

Pour an appropriate amount of hydrogen peroxide into a clean container, and the amount should be appropriate, depending on the amount of steam required. If the amount is large, the steam will be abundant; if the amount is small, the steam will be thin.

Then, the method of heating cannot be ignored. The container can be placed on a warm fire and slowly heat up. However, the degree of heating must be cautious. If it overheats, the hydrogen peroxide will decompose too quickly, causing the steam to be impure and dangerous; if it is too slow, it will take a long time and the steam generation will be sluggish.

When heating, pay attention to observe. If you see that there is a slight rise of steam, you need to control the fire to make the steam produce stably. And when operating, protective equipment is essential. Because the steam has a certain degree of irritation, it is appropriate to wear goggles, masks, etc., to prevent damage to the eyes and respiratory tract.

When the steam output is smooth, it can be collected by appropriate devices. Or introduce other devices with a catheter to prepare for the need. In this way, hydrogen peroxide steam can be obtained. When operating, be careful at all times, and follow this step to achieve the purpose of gas production.