Shanxian Chemical
SUPPLEMENTS
Making Hydrogen Sulfide Gas
Method of making hydrogen sulfide gas
If you want to make hydrogen sulfide gas, you should understand the method. Prepare sulfur and hydrogen first. Sulfur is often found in ores, and it is yellow and brittle. Hydrogen is mostly stored in water and can be obtained by electrolysis.
To combine sulfur and hydrogen into hydrogen sulfide, a device must be placed. This device must be heat-resistant and airtight to prevent gas from escaping. Mix sulfur and hydrogen in the device in an appropriate proportion, usually a little excess sulfur is preferred.
Then heat the device with fire. The temperature of the fire is very important. If it is too high, the reaction will be too fast, which is easy to cause danger. If it is too low, the reaction will be slow and time-consuming. When the temperature is controlled at a suitable degree, the sulfur and hydrogen are slowly combined.
When synthesizing, sulfur and hydrogen atoms interact to form hydrogen sulfide gas. This gas has no color and odor. If you inhale it carelessly, it will be harmful to the body. Therefore, when making gas, you must be in a well-ventilated place and prepare protective equipment.
After the reaction is completed, hydrogen sulfide gas is ready. It can be collected in a bottle by draining and collecting gas. The bottle must be dry and clean to prevent the gas from reacting with water or impurities and damaging its purity. In this way, the hydrogen sulfide gas is completed.
If you want to make hydrogen sulfide gas, you should understand the method. Prepare sulfur and hydrogen first. Sulfur is often found in ores, and it is yellow and brittle. Hydrogen is mostly stored in water and can be obtained by electrolysis.
To combine sulfur and hydrogen into hydrogen sulfide, a device must be placed. This device must be heat-resistant and airtight to prevent gas from escaping. Mix sulfur and hydrogen in the device in an appropriate proportion, usually a little excess sulfur is preferred.
Then heat the device with fire. The temperature of the fire is very important. If it is too high, the reaction will be too fast, which is easy to cause danger. If it is too low, the reaction will be slow and time-consuming. When the temperature is controlled at a suitable degree, the sulfur and hydrogen are slowly combined.
When synthesizing, sulfur and hydrogen atoms interact to form hydrogen sulfide gas. This gas has no color and odor. If you inhale it carelessly, it will be harmful to the body. Therefore, when making gas, you must be in a well-ventilated place and prepare protective equipment.
After the reaction is completed, hydrogen sulfide gas is ready. It can be collected in a bottle by draining and collecting gas. The bottle must be dry and clean to prevent the gas from reacting with water or impurities and damaging its purity. In this way, the hydrogen sulfide gas is completed.
Scan to WhatsApp
